Maker Pro (TMPro) is transponder programming tool, key copier and PIN calculator in one. Hardware is small box, which have to be connected to free PC USB port. Software supports 10 languages - Bulgarian, English, French, Portuguese, Polish, Hungarian, Spanish, Serbian, Italian and Czech.
It is simply to use and offer wide range of supported immoboxes and keys. TMPro is designed to help in locksmith`s job. TMPro is organized as modular software. This means that every supported immobox is separate module. At beginning you can purchase hardware and only one module. In future you can add new modules by simple module purchasing system.
TMPro works with immobilisers eeprom dumps. You must have electronic knowledges and to know how to use soldering-desoldering tools and memory devices programmers. It is your choice what programmer you will use for reading memory devices. I do not add to set or sell any eeprom or MCU programmers.
In order to use TMPro you have to remove immobox or BSI/UCH unit from car, open it, desolder and read specific memory device, which contain needed key information. Safe eeprom area into BIN or EEP format. Then solder back memory device, reassemble immobox and fit back to car. Use saved file with TMPro to program transponder.
In information box is shown type of memory device and what is correct lenght of readed file. Depending of immobox it may be serial eeprom, Motorola MCU or Texas Instruments MCU. You can use any proper programmer to read data from it. TMPro works only with BIN or EEP files.
It automatically recognises immobox by opening eeprom file of it. For modules, which use serial eeprom 93cXX software automatically recognises if dump is readed correctly (x8 or x16), and if needed, swap bytes. If file is of known size and type, software automatically goes to correct module. If file size or type is not recognised, software not goes to desired module.
Anyway if file size is known, you still can program transponder, but in this case written transponder is possible not to contain proper data to start car.TMPro uses 7 types of transponders.
In information box below module picture is shown what transponder have to be used with selected module
Used types are:
- Sokymat Nova, also known as Silca T5 or JMA TP05.
- Philips PCF 7935. You can use also Silca T15 or JMA TP14.
- Philips PCF 7936. You can use also Silca T14 or JMA TP12.
- Sokymat Magic, also known as Megamos Crypto.
You can use also Silca T6 or JMA TP08.
- JMA TPX1 or Errebi TX1
- JMA TPX2 or Errebi TX2
- Texas DST, also known as Texas Crypto or Silca 4D-60 - JMA TP06/TP19
Included in the Package:
Adapter and Cable for Eprom, BDM Cable 8 wires, PIC Cable
+ 5pcs TMPro Chip
|
